Cub Cadet
Hi I have a 4 year old Z Force S 48. (cub cadet) For the few months it has been getting harder to start. Recently it wouldn't start at all. It was acting as if the battery was low and it would just "click" until it caught and started after several tries. The battery has a full charge. I removed the key switch and solenoid and had them tested at the Cub Cadet dealer and they are OK. I re-installed them and jumped the contacts on the solenoid and the machine started. However when I tried to engage the blades it would die. I jumped across the solenoid again and put the switch in safe mode (for reverse operation) and the blades engaged so that I could mow the lawn. Can you tell from this where the problem is? Any help would be appreciated. Key switch does not do anything.
tomplum
littlebear682Original Author
Related Professionals
Beachwood Landscape Architects & Landscape Designers · Hyattsville Landscape Architects & Landscape Designers · Broadlands Landscape Contractors · Firestone Landscape Contractors · Fort Atkinson Landscape Contractors · Middleton Landscape Contractors · Santa Maria Landscape Contractors · Selden Landscape Contractors · Wallingford Landscape Contractors · Woodland Landscape Contractors · Atlanta Window Contractors · Bridgeport Window Contractors · Gibsonton Window Contractors · Kuna Window Contractors · South Laurel Window Contractorslittlebear682Original Author
rcbe
bill_kapaun
littlebear682Original Author
littlebear682Original Author