Return to the Trees Forum | Post a Follow-Up

 o
Replacement for Aesculus pavia

Posted by whaas 5a SE WI (My Page) on
Sat, May 26, 12 at 22:37

This is the perfect location for this plant...well drained soil, mostly shade (perhaps 3 hours direct sun) and good moisture. BUT is so flicking windy near the house. The leaves are extremely tattered already. Same thing happened last year.

I'm going to translplant this 4' tree to a less windy location.

Any suggestions for a replacement? Perfect size is 10-20' tall by no more than 15' wide. Perfer zone 4 hardiness but 5a is ok too since its northwest exposure.


Follow-Up Postings:

 o
RE: Replacement for Aesculus pavia

Fagus sylvatica 'Rotundifolia'

Dax


 o
RE: Replacement for Aesculus pavia

  • Posted by botann z8 SEof Seattle (My Page) on
    Sun, May 27, 12 at 8:07

You're into trees, can't you plant a windbreak and a privacy screen as well?
Mike


 o
RE: Replacement for Aesculus pavia

  • Posted by whaas 5a SE WI (My Page) on
    Sun, May 27, 12 at 15:57

Thanks Dax, I'll have to check that one out. Really never looked at that one. Might get a bit tall for the area.

I know better than not to post a pic.

Mike, I'm working on it but the backyard slopes quite a bit so I might be waiting a couple decades. Picture would have helped right?

Photobucket


 o
RE: Replacement for Aesculus pavia

variegated pagoda dogwood?

calycanthus? i have Athens in a windy z5 in NY...third year...i love spicy melon like fragrance...

which gets us into the whole world of viburnums...


 o
RE: Replacement for Aesculus pavia

  • Posted by whaas 5a SE WI (My Page) on
    Sun, May 27, 12 at 23:16

Good suggestions as those, in one way or another, are on that slope. Its a 45' run.

Mohican Vibrunum, Forest Rouge Blackhaw Viburnum and Ivory Halo Dogwood.


 o
RE: Replacement for Aesculus pavia

Man, that's really close to the house. You need something fastigiate such as Acer rubrum 'Red Rocket'. Even the Aesculus would have gone 30'+ wide.

And for my own minor justification for the 'Rotundifolia' beech, 30 years it would be 15' wide. Fall color = superb! Awesome tree.

Take care whaas,

Dax


 o
RE: Replacement for Aesculus pavia

  • Posted by whaas 5a SE WI (My Page) on
    Mon, May 28, 12 at 12:31

I just went out to verify how far from the house...8.5'.

The only potential issue would be air circulation and rubbing on the siding. So I should stick to something that matures to 15' wide. Does Acer ruburm perform in part shade? I picked up a Red Super Sonic that is pretty nice. How is your Red Rocket doing?

Are you thinking of another Aesculus species? The "average" mature size of Aesculus pavia is about 20 x 15. I'd expected it to be on the smaller end for my area 15' x 10'.

That beech isn't off the table. Any worries with northwest wind exposure? The winds are brutal in this area.


 o
RE: Replacement for Aesculus pavia

I'd stick to a shrub dude. The balance will be all off whack with a tree. That's my opinion, besides, you really don't want a tree planted that close to a house foundation.

All looking good here man. Just a few trees to plant later this year and I think I'm all done. I think I'm going to quit grafting. I don't have any room for any of this freakin' stuff...I'll have to skip the Aesculus, thanks though.

The good think about beech is they leaf very late, and 'Rotundifolia' in particular, leafs two weeks after the others. Plus it's cold hardy for you imo.

Late,

Dax


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Trees Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.