Shop Products
Houzz Logo Print
swflagrdnr

Hunter XC

swflagrdnr
15 years ago

Hi everybody!

I have a Hunter XC lawn irrigation controller that was installed in 2006. I dont use it much in the summer when we get plenty of rain, but come the drier, cooler months (like now) I need it.

Anyway, if I set it to run, it does not stop. It continues to run ad nauseum through all 4 of the zones. After it completes the fourth zone, it statrts up with number one again. Even if I switch to "run all stations manual" it starts over again.

All other aspects of the controller seem to work. The system comes on at the time and days I set it for and each zone appears to run for the correct time. It just wont shut off.

It has three different possible schedules, A, B and C. Within each of these three schedules you can set the time, the day and the length of time each zone stays on. I well understand the concept behind how theis controller works, but why cant I get it to stop?

Anyone else have a similar issue with the Hunter XC?

By the way, yes I did read the manual - several times. This phenomenon is not addressed.

Thanks

Comments (3)

0