Hi Keepitlow,

If the leak is coming from the threads between the nozzle and hose maybe try a thick layer of that white teflon tape that plumbers use or even plumbers putty on the threads. I know epoxy would work for sure but there is a down side with that scenario.:) GL Aloha. /)~/)~...

Keepitlow - What am I missing? Replace the 25 cent hose washer. That's it's only job in life - to prevent the dribbles you are experiencing.
Phil

Keepitlow - What I ws missing is that I didn't read your post completely. Sorry. Are you sure that the problem is not what ever you are connecting to the hose? Check for nicks or dents in the seating edge of the male connector where it is leaking. If all that fails, I'd replace the hose or the end. Phil

Is the hand nozzle plastic or metal? I would suspect threads if plastic. The tape suggestion above might be an effective suggestion.