|
Thu, Apr 8, 10 at 10:37
| I have a pump with some sort of pressure release valve on top. When the zone that operates my drip line is on, water comes out of the top of my pump through this valve at a pretty solid stream. Is there a way to close this or relief the pressure without wasting all of that water? |
Follow-Up Postings:
|
| rosemary, Do you have a pressure regulator on your drip line zone? What pressure and flow is your pump rated for? Are the other zones regular sprinklers? Do you have an owners manual for the pump? What is the make and model of your pump? I could give general suggestions but would rather be more specific to your pump since I can't see it for myself. Aloha |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.