|
Fri, Apr 17, 09 at 11:43
| My Raindail (Model# RD600-EXT) controller is flashing FUS on panel after I turned it off for a rainy weekend and back on Monday. I replaced the 2 amp fuse that looked to be okay and tried to reset by switching the breaker off and on? Unfortunatel it was wired direct by a "professional" so it has constant power.
Does anyone know how to reset or what the problem might be??? I checked all the connections inside the controller and all good. Hmmmm? |
Follow-Up Postings:
|
| Hi zuessuz, FUS signifies it is a short circuit. Push any button to clear it. Below is the link that where you can read the operators manual with what to do. Good Luck. Aloha
|
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.