|
Thu, Apr 17, 08 at 23:21
| I just fired up my sprinkler system and I noticed the pressure seemed a little low so after fooling with the valves I noticed that when opened the valve manualy they worked ok but when the solinoid opened the valve the pressure is lower.
I am not sure what to do any sugestions I sure could use the help. Thanks |
Follow-Up Postings:
|
| Hmm, sounds strange. Are all of your valves doing this? Sounds like the solenoid is only partially opening. Assuming your power supply is adequate, I'd suggest replacing the solenoid. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.