Shop Products
Houzz Logo Print
gmb_ma

varying nozzle flows within a zone

gmb_ma
16 years ago

I have an irrigation system that uses Hunter rotary heads with 4 heads per zone off a well with a 6 GPM recharge rate. Presently all heads are rated at 1.6 GPM however, several zones have heads with varying angular coverage. For a given zone, I would like to consider increasing the nozzle flow rate on heads with wider angular coverage and decreasing the nozzle flow rate on heads with narrower angular coverage. The goal would be to keep the total flow rate for the zone unchanged. I have had no problems with well capacity thus far.

Would that be considered an acceptable and/or desired approach? Any concerns?

Comments (2)