Shop Products
Houzz Logo Print
mazzapazza_gw

Problems with Hunter ICC

mazzapazza
17 years ago

We are running a 16 zone system with a hunter icc. the system was installed last year, and worked great all last summer (we did blow out the lines in fall). The control box says its working, (have tried to reset) but no zones come up. using a voltmeter shows that when a single zone is setup to run, ALL the zones get power where they connect on the box, but no power gets to the actual solenoid. The zones all work fine manually.

i'm thinking either all the wires got cut (perhaps during a dig), which isn't too likely, or the box is bad cuz it gives power to all zones...

even weirder, the one zone that gets only a little power is the first zone the wires run to out of the box...

is that confusing?...

bottem line: have power to box, no zones work. is there a fuse to try to replace? cant find it in the manual...

Comments (3)

Sponsored
Grow Landscapes
Average rating: 4.5 out of 5 stars8 Reviews
Planning Your Outdoor Space in Loundon County?