|
Wed, Aug 1, 12 at 15:04
| Just a few days ago all 9 stations were working fine on the automatic program. Suddenly, three of the stations stopped working. Any ideas on what to check first?
One note, I just had a new fence installed in the backyard, but all three stations are in the front yard, so there has been some digging. |
Follow-Up Postings:
|
| Most likely the trouble is the common wire. First check all the wire connections then look at the possibility of the wire being cut at one of the fence posts. |
|
- Posted by Pedro_5805 95123 (My Page) on Thu, Aug 16, 12 at 16:49
| 1). Where is the Timer located? 2). Are three valves in same location,(connected side by side)? 3). Check if one cable with multiple wires in it, feeds those three valves that are not working. 4). If yes, than look at that valve location, and where the Timer is located, and see if that path crosses near the location of where the fence work performed. * Then let me know what you find... |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.