|
Mon, Aug 9, 10 at 16:45
| We replaced our timer 2 years ago and a couple of valves about 4 years ago. We have 6 valves connected to the timer. They all worked good until recently. The first valve to go on, only stays on about 30 seconds and turns off. It is suppose to stay on for 5 minutes. The timer is still going and after 5 minutes, the next station goes on and the rest run like they should. What can be causing this? |
Follow-Up Postings:
|
| MS, Try replacing the solenoid and see if this fixes the problem. If that doesn't work recondition the valve. If that doesn't work replace the valve. Make sure all connection from the rebellious valve are in good contact in the controller and at the solenoid. Maybe do this first. JMHO Aloha |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.