Return to the Irrigation Forum
| Post a Follow-Up
Hunter Pro C LCD Problem
| | |
Posted by nj_tom_1 VA (My Page) on Thu, Oct 1, 09 at 16:59
| I have a Hunter Pro C 6 zone system. It had been working fine until last year. This year when I went to check it, the LCD pannel was unreadable. The 8's have various missing lines, so it's impossible to set to a desired value.
Although, the system works at the already set values from last year.
Any one has experience or knowledge on how to fix the unit? |
Follow-Up Postings:
RE: Hunter Pro C LCD Problem
| | |
| tom, how old is your controller? |
RE: Hunter Pro C LCD Problem
| | |
| Hello Tom, Hunter Pro C controllers are awewome. The clock is warrantied for 5 years from date of purchase. You should be able to go back to the place of purchase or call your contractor and exchange the front section of the clock. If you dont know how old the clock is, open the clock and look for the date of manufacture stamp inside. |
|
|
|
|
