|
Sun, Nov 4, 12 at 14:46
| I have a Hunter underground sprinkler system for my home. About half the sprinkler heads within one of my zones don't work. I thought I may have confused which zone they were in, but all of my zones seem to be working and these don't come on when I test the system. When I tested the system a couple of weeks ago they were working fine. |
Follow-Up Postings:
|
| Z, Are you familiar with the entire system as installed (all valves and lateral line locations)? This may mean digging up lateral lines and checking for water flow. Are the inoperable heads on the same lateral line or on different lateral lines? aloha |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.