|
Sun, Dec 30, 12 at 18:21
| I use program A, set one start time, the defualt 12 AM; however, the timer continues to repeat afer it runs through 7 stations. This timer has worked w/no glitches for 4 years now. Any suggestions? |
Follow-Up Postings:
|
| db, What is the model No.? Do you have a op manual that has troubleshooting? Try setting different zone combinations and see if it occurs because a particular zone is specified. Try different time to see if the time selection is the issue. Contact Hunter Industries to see if they have a solution. http://www.hunterindustries.com/product/controllers/pro-c Or just cough up the $60 and buy another controller. aloha |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Irrigation Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.