Return to the Winter Sowing Forum | Post a Follow-Up

 o
Making holes in containers the easy way!

Posted by carolinaflowerlover 7b (My Page) on
Wed, Mar 20, 13 at 20:33

Maybe everyone already knows this, but I didn't see it anywhere....

My husband had a brilliant idea on how to easily make holes in plastic containers (yogurt cups, etc)....use a soldering iron! We had very little luck with slits from a knife, as they kept closing up. However, we had this soldering iron sitting around....it is my new best friend. :) If you do not have one, there is one on Amazon for under $10 with good reviews. It is easier to do before putting in dirt, etc, but still works quite well even when dirt is in there. The only downside is it does not work well on metal (pie plates, etc).

P.S. This may not work in colder climates, as it may make the holes too big. However, in my rainy zone 7b climate, it is working very well...mine were getting way too wet. :)

This post was edited by carolinaflowerlover on Thu, Mar 21, 13 at 9:32


Follow-Up Postings:

 o
RE: Making holes in containers the easy way!

I just use a big drill bit on my 3/8 inch drill to make holes in containers.

Sometimes I buy big cheap plastic pots for growing plants that do not have drain holes. For those, I use a spade bit to make bigger drain holes.


 o
RE: Making holes in containers the easy way!

Cool! That works ok on small containers, too? I am not allowed to use knives, etc....I tend to not be good with them. I almost sliced off a finger off in high school, with a scalpel. :p That is why the soldering iron works well for me. The bit is a great idea for larger things, thanks! I will ask my husband to do that with some totes in which I am storing pots. :)


 o
RE: Making holes in containers the easy way!

I don't have a soldering iron but use a skewer heated over the gas. Similar idea.


 o
RE: Making holes in containers the easy way!

I also use an old soldering iron. I found that it made terrible fumes so it is best to do it outside. Even then the fumes can get overwhelming if there isn't a nice breeze blowing. :)


 o
RE: Making holes in containers the easy way!

A wood burning tool works also


 o
RE: Making holes in containers the easy way!

I use a drill. A lot of people use the soldering iron. I've got Gran's playing around. I stick to the drill. Don't forge to post your sprouts.


 o
RE: Making holes in containers the easy way!

I've used an ice pick, drill, soldering iron, and awl. The easiest for me is the awl tool on my swiss army knife, which is usually handier than the other tools. I just insert and twist, but it's pretty sharp so it's best to be careful.

I still do a few new containers each year, but I re-use a lot of containers so I don't have to prep many anyway.


 o
RE: Making holes in containers the easy way!

I use a soldering gun. The gun seems to work better for me because I can control it better, have more use of my other hand, and don't have to mess with a soldering iron stand.
The holes are smaller but square. I just don't like the smell of burning plastic it puts off.

I started using coffee filters in the bottom of milk jugs this year. They fit perfectly and I don't make a mess moving them around after they have soil mix in them. We'll see if I have any issue with roots growing through the holes later this season.

Here is a link that might be useful: Method


 o
RE: Making holes in containers the easy way!

I just use a utility knife. So far no issues and I haven't cut myself yet (knock on wood). And I'm not usually not good with knives either -- I have a cut on one hand now from slicing a sandwich of all things. :)


 o
RE: Making holes in containers the easy way!

I've used a soldering iron for years and love it. I try to prep the majority of my containers in the fall, so I can do this outside because of fumes.

A few times, I have needed to prep containers inside in winter and just didn't feel like using the steak knife (several close calls with that darn thing).

So I open a window, put a fan up and heat up the soldering iron, cringing the whole time about the heat I'm wasting, (can't believe I actually put a fan up to blow my heated air OUT of the window!) trying to work as fast as I can, and thinking how my DH would kill me if he saw me.

But I got caught once. Hours later, my daughter came home, took one step in the door, sniffed, and said with a confused look on her face, "Who was blowing out birthday candles in here?"

So I don't risk it anymore, lol. Back to the steak knife if I don't have enough fall-prepped containers!

:)
Dee


 o
RE: Making holes in containers the easy way!

I've always used the soldering iron method. Certain types of plastic produce much worse fumes than others. Milk jugs are pretty mild. I do all my container prep indoors with no open windows. I will turn on a fan, if I have one handy, but not usually. I can't imagine using a knife or box cutter. I'd slice off fingers in no time. I might try to save my milk jugs this year, because the container prep is time consuming, and my wrists can't manage cutting the plastic, even with excellent scissors. Arthritis is catching up with me and I'm not even 50.

Martha


 o
RE: Making holes in containers the easy way!

Cary, sounds like me. :)

Fortunately, I do not have a good sense of smell, and it is warm enough (40s) to use the soldering iron outside. Lol at the stories. :)


 o
RE: Making holes in containers the easy way!

I use a wood burner. Works very nice


 o
RE: Making holes in containers the easy way!

I'm also a fan of the drill.

I can stack up about half a dozen of the quart size plastic yogurt/sour cream containers and drill holes through all 6 at once. Then I use a utility knife for the vent holes on top.


 o
RE: Making holes in containers the easy way!

Yes to the soldering iron! I do it on the stove with the hood fan on high to eliminate the smell. It is faster and easier than any other method.


 o
RE: Making holes in containers the easy way!

  • Posted by nan-6161 Zone 7 Long Island, (My Page) on
    Sun, Mar 24, 13 at 22:47

I use to use soldering iron.... but then I got over my "fear" of using the electric drill and I am never going back! Easy Peasy. Qucik and neat and no standing out in the cold.

Remember ladies..it's not just the "bad smell", you are BREATHING that burning plastic chemical. Can't be good for you. Get a quick drill lesson from a guy (person?) with a tool belt. You will feel very proud - -I know I did!


 o
RE: Making holes in containers the easy way!

Nan, as you have, I wanted to warn of the fumes given off by plastics and their toxicity. I too, use a soldering iron, but I use it outdoors, with a fan blowing away from me, while wearing a medical mask. I use 2 litre pop bottles, and if I must do it indoors I use an ice-pick: just need to rotate it around a bit and the hole is big enough.


 o
RE: Making holes in containers the easy way!

I use an ice pick for my containers (and also plastic cups for when I pot up house plant cuttings). Drilling holes is the most time consuming part of WS, but once it's over, you're glad it's over LOL.

Brad AKA Moonwolf


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Winter Sowing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here